hercules djcontrol ...
 
Notifications
Clear all

hercules djcontrol instinct s series crossfader works at half

1 Posts
2 Users
0 Likes
0 Views
0
Topic starter

hi, as from title, the crossfader works only in the right half zone. i tried it on djuced, online and so on in many other programs.
i also found a test setup for midi hercules control instinct s and after installed it i tested the crossfader which change numbers of a signal in the screen between 58 to 127 (respectively from left to right) and reverse from 127 to 58. also, the design bar not end on the far left but before, while from left to right it end in the far right.

so, how can this be possible? i also have to say you that this controller was bought as used but as perfection condiction.
is this crossfader not working?
which other test should i do?
what does that means the 58 and 127 (and so many other numbers) that appears when i move the crossfader from left to right?

thanks for answers, sorry for  bad english, i hope i can upload some picture in the future.

0

From all the info you also posted on the MIXXX forum, it sounds like it is indeed a hardware issue with your controller.