microphones distort...
 
Notifications
Clear all

microphones distort horribly

1 Posts
2 Users
0 Likes
0 Views
0
Topic starter

i have two shure wireless microphones. one is set to the low impedance level. both sound horrible and distorted. i cannot go past 1/2 on the microphone levels. if i do, horrible feedback kicks in.

i tried a wired microphone and while not as bad, i cannot go past 3 as the same horrible feedback kicks in.

please help!

0

Hello,

Welcome to the forum.

Please precise:
- the model(s) of the microphones
- the model(s) of the wireless receiver(s)
- the model of the sound card/DJ controller on which it is connected
- on which input of the sound card/DJ controller the wireless receiver is connected
- with which type of cable the wireless receiver is connected.

Many receivers for wireless microphones have a line output instead of microphone level, so they must not be connected to the microphone input but to a line input.
Reading the user manual of the wireless receiver is as necessary as reading the user manual of the microphone.

For absolutely any technical questions, you should complete your technical profile on 
- in "Hercules Equipment In Use", select the name of this equipement
- in "Software In Use", check the name(s) of your DJ software
- in "Describe your equipment", describe your computer
  • brand and model
  • CPU
  • RAM
  • Type of USB port (USB 2.0, USB 3.0, USB 3.1...)
  • Environment (Eg. Window 10 64-bit)
  • version of DJ software (Eg. Djuced 5.2.1)
  • version of DJ driver (Eg. 2020_HDJS_1)