jogvision inner jog...
 
Notifications
Clear all

jogvision inner jog blue leds

1 Posts
2 Users
0 Likes
0 Views
0
Topic starter

hello

i recently got a dj control jogvision to use on the road with mixvibes cross. i mapped the entire controller and everything except the jog blue led ring is working. i can make them light up but there is not signal that i can use to make them rotate from mixvibes.
 i understood from hercules documentation that by using

light-chaser 32 da firmware control  b0 62 value 7f i would enable firmware control of the blue led in the jog wheel. 
i can use value 00 or 7f and neither is working to activate the rotation.
little bit of help please.

0

Hello EDMFigDj,

Welcome on the forum, I have written Jogvision's MIDI commands guide.

Once you have activated the firmware control of the 32-LED blue light-chaser with command B0 62 value 7F,
then you can control the rotation speed with the command B0 63 + value (00 for Pause / 40 for full speed / 7F for dual speed).

To see a way to implement it, you can look at the Traktor mapping on Hercules support website, it uses this firmware control process.

Cheers,

MIB from the UX Team