DJ MP3 E2 setup

	Aanmelden
	STARTPAGINA BLOG FORUMS ERKENNING LEDEN VIDEO'S REGISTRATIE EVENEMENTEN KOPPELINGEN HERCULES

Totaal aantal geregistreerde gebruikers : 8349 • Laatst geregistreerde gebruiker : newow

DJ MP3 E2 setup

dqozzer

7 Berichten

Gepost op 1-2-2012 aan 21:26:16

QUOTE

Hey Guys,
i have recently bought the hercules dj control mp3 e2 and i have downloaded and installed all of the update drivers from the hercules website. after doing this when i try and load up vdj djc edition it tells me that the controller has not been detected and to plug it in and start again. i have tried using a different cable to connect the decks and i have tried uninstalling the software many times and re-installing it. in the toolbar the hercules dj series control panel icon has a red X over it don't know if that has anything to do with it. any advice would be appreciated cheers

DJ Phatso

1457 Berichten

Gepost op 1-2-2012 aan 21:34:01

QUOTE

Canada

DJ Console 4-Mx
DJ Console Rmx
DJ 4Set
DJ Control AIR
DJ Console Mk4
DJ Control Mp3 e2
DJ Control Steel
Deejay Trim 4&6
DJ Console MK2
DJ Control MP3
VirtualDJ®
Traktor®
Djuced®

It is obvious that your controller did not install correctly. Can you verify what exactly is wrong in Device Manager, ?

http://ts.hercules.com/faqs/eng/her_eng_00390.pdf

Have you tried different USB ports on the computer with the same results ?

Try reinstalling the drivers following the steps this procedure:

http://ts.hercules.com/download/sound/txt/DJ_Series_INSTALLATION_PC_EN .pdf

The Phat one!

Hercules DJ Forum Team

dqozzer

7 Berichten

Gepost op 1-2-2012 aan 21:41:16

QUOTE

in my device manager the DJ control mp3 e2 MIDI is fine but the mp3 e2 bulk has a yellow triangle on it and when opened says "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" i have tried using the second procedure

dqozzer

7 Berichten

Gepost op 1-2-2012 aan 21:58:35

QUOTE

i have also tried installing it on different usb ports

DJ Phatso

1457 Berichten

Gepost op 2-2-2012 aan 15:37:30

QUOTE

Canada

DJ Console 4-Mx
DJ Console Rmx
DJ 4Set
DJ Control AIR
DJ Console Mk4
DJ Control Mp3 e2
DJ Control Steel
Deejay Trim 4&6
DJ Console MK2
DJ Control MP3
VirtualDJ®
Traktor®
Djuced®

Please verify the version of the file wdf01000.sys in the following location:

C:\WINDOWS\system32\drivers

These files are hidden, so you'll probably have to change your Folder viewing options to access them.

Normally, the version of the file should be 1.9.7600.16385. Anything older than this is most probably the cause of the problem.

The Phat one!

Hercules DJ Forum Team

dqozzer

7 Berichten

Gepost op 2-2-2012 aan 17:14:22

QUOTE

It is version 1.7.6001.0 Can i update it?

DJ Phatso

1457 Berichten

Gepost op 2-2-2012 aan 17:34:51

QUOTE

Canada

DJ Console 4-Mx
DJ Console Rmx
DJ 4Set
DJ Control AIR
DJ Console Mk4
DJ Control Mp3 e2
DJ Control Steel
Deejay Trim 4&6
DJ Console MK2
DJ Control MP3
VirtualDJ®
Traktor®
Djuced®

It is possible, but a little complicated.

Uninstall the driver package before starting

1) Start cmd.exe as *Administrator*,

- Right-click on your desktop and select NEW > Shortcut
- In the window that appears, type CMD, then next then Finish.
- Right-click the new shortcut created on your desktop and select Run as administrator

2) Enter the following lines:

takeown /f C:\Windows\System32\drivers\Wdf01000.sys

takeown /f C:\Windows\System32\drivers\WdfLdr.sys

icacls C:\Windows\System32\drivers\Wdf01000.sys /grant <yourusername>:f

icacls C:\Windows\System32\drivers\WdfLdr.sys /grant <yourusername>:f

3) Overwrite the files in C:\Windows\System32\drivers\ with the new ones provided here:

http://www.mediafire.com/?ym4vpvgdjbfm60w

4) Reboot the computer.

5) Install the latest driver package as you normally would

Let me know if you have any problems

The Phat one!

Hercules DJ Forum Team

dqozzer

7 Berichten

Gepost op 2-2-2012 aan 18:09:33

QUOTE

I have got up to step 2 and the 2 takeown commands succeeded but when i try and use the second 2 commands it says the system cannot find the file specified... thank you for your help so far!