HERCULES DJ MIX ROOM: Die Hercules DJ User Community

dj trim 4 & 6 and timecode

lemairerey — Fri, 03 Sep 2010 10:59:48 +0100

Hello everyone ans sorry for my english ( i'am french DJ )

I just received my DJ trim 4 & 6 (I was ahead with a Maya 44 usb, Deckadance, and cd timecode tracktor)
This morning I try to configure my dj trim my Deckadance and time codes
all it's good but i listen the signal of timecode and the music in my pionner DJM 500

or how to cut the level of input sound card like maya 44 USB ( it's possible to cut ligne enter )

Proper setup Virtual DJ MK4

eldeleon — Fri, 03 Sep 2010 06:04:02 +0100

I am new in this world and I have upgraded to the PRO version for the virtual DJ software but I canot make to recognize the Hercules MK4 in order to recognize the buttons or even to hear on the headphone, if you can let me know which its the proper selection for primary card and so for,

thank you in advance

headphone & speakers

Xvoster — Thu, 02 Sep 2010 17:25:53 +0100

dj console rmx.
I would like to mix music, but I can not make that work, console connected to the pc , and from there to the speakers, well and headphones into the console in jack. In VDJ settings selected headphones, and 2 sound cards, but no sound comes through the speakers, but only through headphones. In the settings windows all done .... Help solve the problem

Problema con Dj Control MP3 e2 en Windows Vista

DaviZero — Thu, 02 Sep 2010 14:13:53 +0100

Saludos.

Estoy realmente desesperado intentando hacer funcionar DJ control MP3 e2 en el portatil el cual tengo windows vista.
He provado con el pc de sobremesa y funciona TODO perfecto (W7 64bits) sin embargo en el portatil (W vista 32bits) no consigo que funcione, de echo ni me la detecta ya que me sale el Hercules Dj control panel con la aspa roja como si estubiera desconectado. He seguido todos los pasos correctamente, enchufo el dispositivo cuando lo pide y hago caso omiso a las ventanas de deteccion de sofware del propio windows vista, he provado borrando todos los archivos y reinstalando de nuevo y tambien bajando las ultimas actualizaciones de los controladores, sin embargo el problema persiste. Necesito ayuda urgentemente.

Gracias

Saludos

Virtual dj 6

BlessIam — Thu, 02 Sep 2010 03:19:52 +0100

im stuck and confuse, i just download vdj 6 but my rxm console doesnt respond to it? help thanks a lot.....also when i donwload the vdj that came with it, is it like a trail not a full edition? becuase it doesnt give me full info like allow me to change skins or add other effect etc i need some help and im stressing it now since i bought it on sunday thanks again i might sound dumb sorry :-(

Soundcard Help

Johnnyrox — Thu, 02 Sep 2010 02:48:43 +0100

I have a new dedicated laptop (plenty fast enough), Virtual DJ Pro, and Hercules MK4. I downloaded the current drivers. I had sound issues out of the box- stuttering, popping, delays. I adjusted the buffer until it stopped (69ms) worked for several days then all of a sudden in the middle of recording a mix it started stuttering and dropping out so bad I had to restart Virtual DJ. Also a couple of times the controller wasnt jiving with the software fader. I have used VDJ direct to a PC and Tractor through Native Instruments Audio 2 DJ sound card and had no sound or mapping/control issues. I have since adjusted the buffer to maximum. I love using the MK4. Any suggestions? can I bypass the internal soundcard and run through the adio 2 dj card? Thanks Jrox

Help Hercules RMX+VDJ+music players

AlejoPC — Thu, 02 Sep 2010 01:51:20 +0100

Hi guys, i'm new here, i'm from argentina so let's make clear my english is not the best one out there =P.
My question is:
Is it possible that, when I have connected my RMX to my pc (Win XP), opened the HDJC pannel, changed the default WDM to ASIO, right after that, open the VDJ, go to settings and change the sound setting to the ASIO driver, then everything ok, start listening and djing buuuuuuuuuuuttttttt............ when i try to listen to music on Winamp or WMP or any other music player (while still djing on the VDJ) a message comes out as incorrect controler or sth. i'm pretty sure i was able to do that the last time i checked (1 month ago). with the setting i've done, the only way to listen to music is out the VDJ? or there is sth behind?
thanks for ur help guys!
BY THE WAY, i followed all the instructions on http://ts.hercules.com/es/ and that new version installed did not even recognize my rmx !! so... what's going on?!

configure traktor 1.0.1.070 au controleur hercules mp3 e2

dj_soundzzz — Wed, 01 Sep 2010 11:00:13 +0100

bonjour j aimerait connaitre la configuration a effectue pour branche le controleur hercules mp3 e2 a traktor 1.0.1.070

i have some problems with hard-and software

den_samm — Tue, 31 Aug 2010 15:31:39 +0100

i just bought my hercules controll mp3 for virtual dj,i wanted to install it on my laptop,but this didn't work because my laptop runs on windows 7,the second problem that i have is that my hardware is running on a very old version of virtual dj , ive tried to use vdj 6 with my controller but this don't work,anyone who can help me please help me,this is very annoying cause i cant use the full capacity of the controller

Delayed Release

DJ Trx MechaniX — Tue, 31 Aug 2010 02:34:57 +0100

When I try to do a scratch intro when I release there is a half second delay how do I fix it.