Xvoster
3
Nachrichten |
Eingestellt von 02/09/2010 an 17:25:53
|
|
Russian...
|
dj console rmx.
I would like to mix music, but I can not make that work, console connected to the pc , and from there to the speakers, well and headphones into the console in jack. In VDJ settings selected headphones, and 2 sound cards, but no sound comes through the speakers, but only through headphones. In the settings windows all done .... Help solve the problem
|
Maxdjack
629
Nachrichten |
Eingestellt von 02/09/2010 an 17:53:31
|
|
Canada
 DJ Console 4-Mx DJ Console Rmx DJ Control Mp3 e2 Deejay Trim 4&6 VirtualDJ®- Traktor®
|
Hello,
Where are your speakers connected?
Why do you set 2 sound cards as VDJ sound card setting instead of choosing DJ Console Rmx as only sound card?
Answering to technical questions with
- more technical details than needed is NEVER a problem,
- less technical details than needed is ALWAYS a problem.
|
Xvoster
3
Nachrichten |
Eingestellt von 02/09/2010 an 18:01:00
|
|
Russian...
|
heya,
My speakers connected to the my computer.
I choose one sound card and headphones, I can not hear sound through the speakers, and they are connected to the pc via a standard connector and headphones plugged into the headphone connector.
|
Xvoster
3
Nachrichten |
Eingestellt von 02/09/2010 an 19:19:36
|
|
Russian...
|
simply, I would like to with the deck A, the music was in the speakers in the position cue, as to the deck b in the headphones. but in the position of mix, deck b was heard in the speakers
|
Maxdjack
629
Nachrichten |
Eingestellt von 03/09/2010 an 10:51:34
|
|
Canada
- DJ Console 4-Mx
- DJ Console Rmx
- DJ Control Mp3 e2
- Deejay Trim 4&6
- VirtualDJ®
- Traktor®
|
Hello Xvoster,
Please precise your sound setup in VirtualDJ, your VirtualDJ version, and your computer configuration.
I think it is a bad idea to use 2 different sound cards in a DJ software:
- it may causes audio glitches as the software must synchronise 2 cards with different latencies,
- so you must set a higher latency than with any of the sound cards,
- the audio settings are very complicated.
So, if you cannot plug your speakers directly in your DJ Console Rmx output 1-2, I suggest
- you connect an audio cable (2 RCA male to jack 1/8" stereo male) from DJ Console Rmx output 1-2 (RCA plugs) to the line input of your computer sound card (jack 1/8" plug),
- you set the Rmx as only sound card in VirtualDJ
For example, in case you use VirtualDJ 6 Pro, you can set VirtualDJ sound setup as:
- inputs: None
- outputs: Headphones
- sound card : DJ Console Rmx
- Master : Chan 1&2 / Headphones : Chan 3&4
- Apply EQ on external inputs: Yes
Answering to technical questions with
- more technical details than needed is NEVER a problem,
- less technical details than needed is ALWAYS a problem.
|
Total registrierte Benutzer : 6920 • Neuster registrierter Benutzer : Lucky Dave 
QUOTE
SPRACHE 
RSS FEED