BROADBEAN
7
Nachrichten |
Eingestellt von 23.01.2012 an 20:35:31
|
|
UK
|
Dear All,
&nbs
p; I would like to connect my RMX output direct to the input of my amp which is equipped with RCA and jack inputs etc? What type of jacks would be required etc and will it be stereo sound??
|
DJ Phatso
1453
Nachrichten |
Eingestellt von 23.01.2012 an 21:39:01
|
|
Canada
 DJ Console 4-Mx DJ Console Rmx DJ 4Set DJ Control AIR DJ Console Mk4 DJ Control Mp3 e2 DJ Control Steel Deejay Trim 4&6 DJ Console MK2 DJ Control MP3 VirtualDJ®- Traktor®
- Djuced®
|
Just like you would for any audio sources, all you have to do is to connect Output 1-2 of the Rmx to one of the input on your amplifier, using either RCA or jacks.
Obviously, to obtain sound in stereo, both left and right need to be connected.
The Phat one!
Hercules DJ Forum Team
|
BROADBEAN
7
Nachrichten |
Eingestellt von 23.01.2012 an 21:54:02
|
|
UK
|
Thanks for the info. I thought this was the case. I am old school DJ and use twin cd with KAM Mixer and amps etc. What I was concerned about was the the manual for my RMX (just purchased) says that youcan connect either RCA1/2 or 1/4 Jacks. My other question is my amp has either or RCA or Jack. Which would be the best for club DJing or does it not matter. Also if using the Jacks will they rquire to be t/r/s stereo/balanced mono, or does this not matter?? All the Best and again thanks for prompt reply
|
DJ Phatso
1453
Nachrichten |
Eingestellt von 26.01.2012 an 20:31:28
|
|
Canada
- DJ Console 4-Mx
- DJ Console Rmx
- DJ 4Set
- DJ Control AIR
- DJ Console Mk4
- DJ Control Mp3 e2
- DJ Control Steel
- Deejay Trim 4&6
- DJ Console MK2
- DJ Control MP3
- VirtualDJ®
- Traktor®
- Djuced®
|
The output to use really depens on your amp.
Just know that the RCA are standard LINE level (-10dBu) while the jacks send out a stronger signal (+4dBv), and are TRS mono.
The Phat one!
Hercules DJ Forum Team
|
Total registrierte Benutzer : 8259 • Neuster registrierter Benutzer : UAE 
QUOTE
SPRACHE 
RSS FEED